Loading ...
Loading ...
Loading ...
507787-01Cmrcool.comPage 10 of 22
hazardous to your health.
Avoid breathing vapors or fumes from brazing
areas.
Wear gloves and protective goggles or face shield to
protect against burns.
prevent oxidation and the introduction of moisture into
the system.
NOTE:
.
1.
the lines in a direct path, avoiding unnecessary turns
and bends.
2. Make sure that the suction line is insulated over the
entire exposed length and that neither suction nor
3. To avoid damaging the rubber grommets in the cabinet
source.
NOTE:
suction line connections.
4. Connect the suction and liquid lines to the evaporator
coil. Take care to protect the cabinet and internal
components as detailed in Figure 10.
5. Braze using an alloy of silver or copper and phosphorus
NOTE: Do not use soft solder.
6.
NOTE:
7. Reinstall the rubber grommets into the refrigerant
piping panel.
NOTE:
not touching metal edges or copper tubing.
8. Make sure outdoor unit has been placed according
to the Installation Instructions and is connected to the
refrigerant lines
Loading ...
Loading ...
Loading ...