Loading ...
Loading ...
Loading ...
6 EN
Check left or right orientation of the
earpiece.
Insert the earpieces into the ears
and twist slightly until a secure t is
achieved.
Insert the earpieces
1
2
Single earpiece (Mono mode)
Take either right or left earpiece out
from charging case for Mono use. The
earpiece will power on automatically.
Take the second earpiece from the charging
case and they will pair with each other
automatically.
Note
Pair the earpieces with
your Bluetooth device for
the rst time
1
2
Make sure that the earpieces are
fully charged and powered o.
Take out the earpieces from the
charging case, the earphones will
power on automatically and enter
pairing mode.
Turn on the Bluetooth function of
your Bluetooth device.
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
The LEDs on both earpieces
ash white and blue alternately
The earpieces are now in pairing
mode and are ready to pair with
a Bluetooth device
(e.g. a mobile phone)
3
4
After powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
Note
Philips TAT1207
The following example shows you
how to pair the earpieces with
your Bluetooth device.
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAT1207.
Enter the earpieces' password
“0000” (4 zeros) if prompted. For
those devices featuring Bluetooth
3.0 or higher, there is no need to
enter a password.
1
2
Loading ...
Loading ...
Loading ...