Loading ...
Loading ...
Loading ...
Donot usethe icechute asa handmewhen
removing or repmacingthe icestorage bin,
Surfaces there may be sharp,
Donot put fingers up icechute, Surfaces
!he[emaybesharp.
CLEANING THE ICE DISPENSER
Clean the dispenser and ice container at regular intervals, particularly
before you take a vacation or move, or if the ice dispenser sticks.
1. Stop ice production by rifting the wire signa[ arm to the "up" or OFF
position.
2. Remove ice container by [ifting up and out. Empty and carefuUUydean
the container with miJd detergent. Rinse with clear water. Do not use
harsh orabrasive cUeaners.AUUowice container to dry compUeteUybefore
repUacingin the freezer.
3. Remove ice chips and clean the shelf and chute that supports the ice
container.
4. Replace the ice container. Lower the wire signal arm on the ice
maker to the "down" or ON position and the ice maker will resume
[[V[PORTANT: When removing or replacing the ice bin. do not
rotate the auger in the ice bin. If the auger is accidentally turned.
you must realign the auger bytuming it in 90° turns until the ice bin
fits into place with the drive mechanism.
Remove and empty the ice storage bin if:
1, An extended power failure (one hour or longer causes ice cubes in
the ice storage bin to melt and freeze together and iam the dispenser
mechanism,
2, The ice dispenser is not used frequently, ice cubes wiii freeze together
in the bin and jam the dispenser mechanism, Remove the ice storage
bin and shake to loosen the cubes,
NEVER use an ice pick or similar sharp instrument to break up the ice,
This could damage the ice storage bin and dispenser mechanism,
14
Loading ...
Loading ...
Loading ...