Aicok CM9101 5-Cup Drip Coffee Maker

User Manual - Page 6

For CM9101.

PDF File Manual, 8 pages, Read Online | Download pdf file

CM9101 photo
Loading ...
Loading ...
Loading ...
4
5. Press Power switch to “I” position, the indicator will be illuminated. The appliance will
begin working.
6. The brewing process can be interrupted by pressing Power switch to “O” position. The
appliance will continue brewing once the Power switch is pressed to “I” position again.
Note: You can take out carafe, pour and serve at any time. The appliance will stop
dripping automatically. But the time cannot exceed 30 seconds.
Caution: DO NOT touch cover, warming plate and so on when operating as they are very hot.
7. When the process is finished, if you do not want to serve immediately, keep the coffee
maker is energized, the coffee can be kept warm in the warming plate. For an optimum
coffee taste, serve it just after brewing.
Note: Please make sure the carafe is not empty when keeping warm to avoid dry boiling.
8. Remove out carafe to serve when finish brewing (about one minute later after the
coffee stops dripping out.)
Note: The coffee you get will less than the water you have added, as some water is absorbed
by coffee powder. DO NOT touch cover, warming plate and so on when operating as they are
very hot.
9. Always turn the coffee maker off and disconnect the power supply when not use.
Note: Pay attention to pour the coffee out, otherwise you may be hurt as the temperature
of coffee just finished is high.
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning. To protect against electrical
shock, do not immerse cord, plug or unit in water or liquid. After each use, always make
sure plug is first removed from wall outlet.
1. Clean all detachable parts after each use in hot, sudsy water.
2. Wipe the product’s exterior surface with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the area above the funnel and drip onto the product base
during brewing. To control the dripping, wipe off the area with a clean, dry cloth after
each use of the product.
4. Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean
it.
5. Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, you should clean away the mineral
deposits left by the water regularly according to the water quality in your area and the
Loading ...
Loading ...