Loading ...
Loading ...
Loading ...
TheNationalElectricalCode,
OccupationalSafetyandHealthAct
regulations,localindustrialcodesand
localinspectionrequirementsalso
provideabasisforequipment
installation,use,andservice.
SHOCK HAZARDS
WARNING
Electric shock can kill! To
reduce therisk of death or
seriousinjuryfrom shock,
read,understand,andfollow the
following safety instructions.Inaddition,
make certainthatanyoneelsewho uses
thisweldingequipment,or who isa
bystanderintheweldingarea
understandsandfollows thesesafety
instructionsas well.
• IMPORTANT!TO REDUCE THE RISK
OF DEATH, INJURY,OR PROPERTY
DAMAGE,DO NOTAI-FEMPT
OPERATIONofthisweldingequipment
untilyouhavereadandunderstandthe
following safetysummary.
• Do not,inanymanner,comeinto
physicalcontactwithanypartofthe
weldingcurrentcircuit.The welding
currentcircuitincludes:
a. theworkpieceor anyconductive
materialincontactwithit,
b. theworkpiececlamp,
c. theelectrodeorweldingwire,
d. anymetal partsontheelectrode
holder,orwirefeed gun.
• Do notweldina dampareaorcomein
contactwitha moistorwetsurface.
• Do notattempttoweldifanypart of
clothingor bodyis wet.
• Do notallowtheweldingequipmentto
comein contactwithwaterormoisture.
• Do notdragweldingcables,wirefeed
gun,orwelderpowercordthroughor
allowthemtocomeintocontactwith
wateror moisture.
• Do not touch welder, attempt to turn
welder on or off if any part of the body
or clothing is moist or if you are in
physical contact with water or moisture.
• Do not attempt to plug the welder into
the power source if any part of body or
clothing is moist, or if you are in
physical contact with water or moisture.
• Do not connect welder workpiece
clamp to or weld on electrical conduit.
• Do not alter power cord or power cord
plug in any way.
• Do not attempt to plug the welder into
the power source if the ground prong
on power cord plug is bent over, broken
off, or missing.
• Do not allow the welder to be
connected to the power source or
attempt to weld if the welder, welding
cables, welding site, or welder power
cord are exposed to any form of
atmospheric precipitation, or salt water
spray.
• Do not carry coiled welding cables
around shoulders, or any other part of
the body, when they are plugged into
the welder.
• Do not modify any wiring, ground
connections, switches, or fuses in this
welding equipment.
• Wear welding gloves to help insulate
hands from welding circuit.
• Keep all liquidcontainers far enough
away from the welder and work area so
that if spilled,the liquid can not possibly
come in contactwith any part of the
welder or electrical welding circuit.
• Replace any cracked or damaged parts
that are insulated or act as insulators
such as welding cables, power cord, or
electrode holder IMMEDIATELY.
Loading ...
Loading ...
Loading ...