Loading ...
Loading ...
Loading ...
14
USE AND CARE
OVEN FITTING OUT
Operate as follows:
■ Assemble the wire racks on the side
oven walls sliding the rear prongs of
each rack into the holes “A” at the
rear of the oven (g. 9a). Fit the side
racks front tab over the xing point and
tighten the xing screws.
■ Slide in the grease lter on the back of
the oven as in g. 10.
■ Slide in, on the guides, the shelf (g. 9b).
The rack must be tted so that the
safety notch, which stops it sliding out,
faces the inside of the oven; the guard
rail shall be at the back.
Oven tray
■ The oven tray must be correctly placed
on the shaped wire shelf (not the at one)
or on the telescopic sliding shelf supports
(g. 9b, with the sliding supports not on
the third level from the bottom).
CAUTION:
■ This appliance must be used only for the task it has explicitly been designed for, that
is for domestic cooking of foodstuffs. Any other form of usage is to be considered as
inappropriate and therefore dangerous.
■ Do NOT place combustible materials or products on this appliance at any time.
A
A
Figure 9a
Figure 9b
Stop notch
Guard rail
or
Loading ...
Loading ...
Loading ...