Loading ...
Loading ...
Loading ...
41
ENGLISH
41
TROUBLESHOOTING
Most laundering problems are easily solved if you understand the cause.
Using the tables below will save you time and money by helping you avoid
unnecessary service calls.
Problem Possible Cause Solution
“PF”
Dryer connected to power supply Press STOP/CANCEL to clear display.
(Power Failure)
during installation or power
failure.
Drying cycle interrupted Press START to restart the dryer.
by power failure.
“E1” or “E2”
Service required. Call for service.
(Service Codes)
Lint screen is clogged with lint. Clean lint screen.
Restricted air movement. Run dryer for 5-10 minutes. Hold
Exhaust vent or outside hand under outside exhaust hood to
exhaust hood is clogged with lint. check air movement. If you do not feel
air moving, clean exhaust system of
lint or replace exhaust vent with rigid
or flexible heavy metal vent
(see “INSTALLATION,” Section D).
Exhaust vent is crushed Replace with heavy or flexible
or kinked. metal vent
(see “INSTALLATION,” Section D).
Gas valve on supply line Open all valves.
is closed.
AIR DRY Cycle has been Select the right cycle for the types
selected. of garments being dried
(see “OPERATION”).
Load not contacting the Level dryer
sensor strips and automatic (see “INSTALLATION,” Section B).
cycle ending early.
Fabric softener sheets Use only one softener sheet per load
blocking outlet grill. and only use it once.
Dryer located in room with Move dryer where it can operate in
temperature below 45°F. ambient air temperatures above 45°F.
Large amount of moisture Expect longer dry times with items
in the load. that hold more moisture (cottons).
Cold rinse water used. Expect longer dry times, but you are
saving energy and reducing wrinkles.
Load too large and bulky to Separate load to tumble freely.
dry quickly.
Message Codes
Not Drying
Satisfactorily
8318111(v04) 3/3/00 9:57 AM Page 41
Loading ...
Loading ...
Loading ...