Loading ...
Loading ...
Loading ...
49-1000586 Rev. 2 31
LEVEL THE FREEZER DOOR
(cont.)
Lift the door on the side requiring adjustment,
rotate the cam to required position.
After adjustment tighten the 3 attachment
screws using to 65 in-lb (7.34 N-m).
6
0 - Initial position
/LIWE\´FP
/RZHUE\´FP
/RZHUE\´FP
/RZHUE\´FP
C
D
INSTALLATION INSTRUCTIONS
Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
7
REFRIGERATOR AND
FREEZER HANDLE
INSTALLATION
Before You Start….
Ŷ To avoid injury, wear closed-toe shoes when
installing the handles.
Ŷ While installing the handle, grasp the handle
firmly to ensure it does not fall or scratch the
appliance’s finish.
Ŷ IMPORTANT: To make sure the handles are
accurately installed, please review the instructions
and graphics before you begin installation.
Ŷ IMPORTANT: Do not use power tools to
tighten set screws.
Tools Provided:
Ŷ´KH[NH\
7
REFRIGERATOR AND
FREEZER HANDLE
INSTALLATION (CONT.)
+DQGOHDSSHDUDQFHPD\YDU\EDVHGRQPRGHO
however, the installation process is the same.
Remove any protective film from the door
or drawer fronts before installing handles (if
applicable).
Remove handle from packaging and locate
WKHSURYLGHG´KH[NH\
Place the handle over the mounting fasteners
until it is flush against the surface of the door.
Tighten both set screws in the handle end
FDSVE\WXUQLQJWKH´KH[NH\FORFNZLVH
until the handle will not hang loose or fall from
its mounting. Do not fully tighten yet.
IMPORTANT: Hold the handle firmly against
the door, make sure there are no gaps
between the handle end caps and the door,
and fully tighten the set screws.
To remove the handles, reverse the
installation process.
A
B
C
D
E
Loading ...
Loading ...
Loading ...