Loading ...
Loading ...
Loading ...
5
6
7
3 4
Plug the product. Turn on the switch to
operate the heater
Note: For heaters intended to be permanently connected to fixed wiring, means for
all-pole full disconnection must be incorporated in the fixed wiring in accordance with
the National wiring rules.
Warning: Electrical installation must only be completed by an authorised electrician. If
the power lead is damaged, it must be replaced by the manufacturer’s service agent or
similarly qualified persons to avoid a hazard.
To secure the heater safely
to the wall, fasten the screw
on each of the two catches
at the top of the wall
bracket.
Place the heater on the wall
bracket (1), secure the tilt strap
(2) and click the heater onto the
top catches (3).
Place the wall bracket onto the bottom
screws (A-A). Then fasten the wall bracket
with the top screws.
Loading ...
Loading ...
Loading ...