Loading ...
Loading ...
Loading ...
Installation
31
EN
The appliance can work in the following
modes:
• 220-240 V 1N~
Use a 3 x 2.5 mm² three-core cable.
• 380-415 V 2N~
Use a 4 x 1.5 mm² four-core cable.
• 380-415 V 3N~
Use a 5 x 1.5 mm² five-core cable.
Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations. The circuit breaker should be
located near the appliance and in an easily
reachable position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type. Avoid use of adapters and
shunts as these could cause overheating
and a risk of burns.
Overall dimensions
Location of gas and electrical connection
points.
The values indicated above refer
to the cross-section of the internal
conductor.
A 40 mm
B 618 mm
C 124 mm
D 12 mm
Loading ...
Loading ...
Loading ...