Loading ...
Loading ...
Loading ...
en Automatic safety cut-out
38
2. Touch the x symbol. A üabove the x symbol
flashes. ‹‹ min lights up in the timer display.
3. Within the next 10 seconds, set the desired cooking
time with the twist knob.
The cooking time counts down. If you have set a
cooking time for several cooking positions, the shortest
cooking time will be displayed. A üabove the x symbol
lights up. The x display for the cooking position lights
up.
When the time has elapsed
When the cooking time has elapsed, the cooking
position switches off. ‹ lights up in the cooking position
display. An audible signal sounds. ‹‹ flashes for one
minute in the timer display. The x display flashes.
Touch any control. The displays go out and the audible
signal ceases.
Changing or cancelling the cooking time
Select the hotplate using the twist knob. Touch the x
symbol and change the cooking time or set to ‹‹.
Notes
■ If you want to query the remaining cooking time for a
particular hotplate, select the hotplate with the twist
knob. The cooking time appears for 10 seconds.
■ You can select a cooking time of up to 99 minutes.
■ If the cooking time has counted down to the last
minute, the timer display changes from minutes to
seconds.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.~ Page 39
Note: You can change the cooking time for a hotplate
or switch off the automatic timer for the hotplates:
Select the hotplate and touch the x symbol. Change
the cooking time or set to ‹‹ in the settings range.
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Setting the kitchen timer
1. Touch the U symbol. The display A above the U
symbol flashes. ‹‹min lights up in the timer display.
2. Use the twist knob to set the desired cooking time.
The timer starts counting down after a few seconds.
When the time has elapsed
When the time has elapsed, an audible signal sounds
and ‹‹ flashes in the display for one minute. The A
display above the U symbol lights up. Touch any
symbol. The displays go out and the audible signal
ceases.
Setting the correct time
Touch the U symbol and use the twist knob to change
the time.
Stopwatch function
The stopwatch function displays the time that has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the
stopwatch function is switched off as well.
The stopwatch function is switched on by touching the
œ symbol. ‹‹ appears in the timer display and timing
starts. Seconds are displayed during the first minute,
and then minutes.
The stopwatch function is switched off by touching the
œ symbol again. The timer display goes out.
Note: If another time-setting option is selected in
addition to the stopwatch function, the setting appears
in the timer display for 10 seconds. The stopwatch
function is then displayed again.
bAutomatic safety cut-out
Au t o mat i c saf et y cut - out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating. ”‰ and the •/œ residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
PLQ
PLQ
Loading ...
Loading ...
Loading ...