Loading ...
Loading ...
Loading ...
Installation of MA series wall-through ventilation fan
7
4
8
5
13
9
6
Use the back part of the front
panel to mark the four screw
holes. Drill the holes.
Remove the front panel cover to
enable access to the fastening
holes.
Connect the front panel cover with
the back part and secure them with
a screw at the bottom.
Route all the required cables.
If the fan is equipped with a
power cable and a plug, make
sure an electric outlet is located
no more than 9 ft from the fan.
Insert the expansion anchors in
the holes.
Fix the back part of the front
panel to the wall using the
supplied screws. Wire the fan
according to the wiring diagram in
Fig. 20 or 22.
Loading ...
Loading ...
Loading ...