Loading ...
Loading ...
Loading ...
LOCATION
• Remove interior and exterior packaging prior to
installation. Wipe the outside of the appliance
with a soft, dry cloth and the inside with a
lukewarm wet cloth.
• Place the appliance on a fl at surface that is
strong enough to support it when it is fully
loaded.
• Do not place the appliance in direct sunlight or
near sources of heat, such as a stove or heater,
as this can increase electrical consumption.
Extreme cold ambient temperatures may also
cause the appliance to perform improperly.
• Do not use the appliance near water, for
example in a wet basement or near a sink.
• This appliance is intended for indoor use only. It
is not designed for outside installation, including
anywhere that is not temperature controlled
(garages, porches, vehicles, etc.).
• This appliance is 21.9 cm (8.6 inches) wide by
35 cm (13.8 inches) high by 28.8 cm (11.3
inches) deep.
• Allow 10 cm (3.9 inches) of space between the
back and sides of the refrigerator and 30 cm
(11.8 inches) between the top of the appliance
and all adjacent walls or objects.
• This appliance is intended for free-standing
installation only and is not intended to be
built into a cabinet or counter. Building in this
appliance can cause it to malfunction.
FEATURES
1. Digital display
2. Light button
3. Magnetic gasket
4. Shelves
5. Ventilation
6. DC input
7. Air inlet
8. Power adapter
3
INSTALLATION INSTRUCTIONS OPERATING INSTRUCTIONS
IMPORTANT
Ensure that the door is fully closed when the
appliance is in operation. Failure to fully close
the door can lead to excessive condensation
and potential water damage to fl ooring under
the appliance. Danby will not be responsible
for damages from misuse.
1
2
3
45
5
6
7
8
Note: images in
the manual are for
instructional purposes
only, the actual look
of the product may be
different.
Loading ...
Loading ...
Loading ...