Loading ...
Loading ...
Loading ...
OPERATION
10
Before Use
Do not scratch the appliance with a sharp object or use a detergent that contains
alcohol, a flammable liquid or an abrasive when removing any tape or adhesive
from the appliance.
Do not peel off the model or serial number label or the wiring diagram on the rear
surface of the appliance as this will void the warranty.
Open appliance doors to ventilate the interior as the appliance may have a "new
car smell".
Clean the appliance thoroughly by wiping off all surfaces with a soft cloth and mild
detergent.
The appliance may make a loud noise after initial operation. This is normal and will
decrease as the temperature decreases.
Remove any adhesive tape from inside the appliance and open the doors for
ventilation.
When the control dial is set to 0 (zero) power is still supplied to the
appliance. Disconnect the power before servicing or cleaning to prevent
injury or death.
If the refrigerator is unplugged, turned off or has lost power, you must wait 3 to 5
minutes before restarting the unit. If you attempt to restart before this time delay,
the refrigerator will not start.
WARNING
CAUTION
Loading ...
Loading ...
Loading ...