Loading ...
Loading ...
Loading ...
SETTING TEMPERATURE CONTROLS FOR 22, 25, & 27
CU. FT. PROFILE PERFORMANCE WATER FILTER
MODELS
Initially, set both fresh food and freezer controls to "5."
I FRESH FOOD
,,I
Control settings are based on personal preferences, usage, and operating
conditions and may require more than one adjustmenL
At first, set both fresh food and freezer controis to
u5._
Wait 24 hours for temperature to stabilize.
Test the temperature in each compartment. If the
temperature in either compartment is not
acceptable, adjust the controls using the chart
below.
Always allow 24 hours for temperature to stabilize
whether you are setting the controls for the first
time or readjusting them.
How to Test Temperatures
To test the fresh food compartment, place a
beverage on the top shelf. After 24 hours, taste the
ddnk. If the temperature is not satisfactory, adjust
the controls accordingly.
To test the freezer compartment, place a
container of ice cream in the center of the freezer.
After 24 hours, if the ice cream is not the firmness
you prefer, adjust the controls accordingly.
Turning the freezer control to (_ shuts off cooling
to both the fresh food and freezer compartments.
COMPARTMENT TEMPERATURE
FRESH FOOD TOO WARM
FRESH FOOD TOO COLD
FREEZER TOO WARM
FREEZER TOO COLD
ADJUST
FRESH FOOD CONTROL
RIGHT ONE POSITION
LEFT ONE POSITION
DO NOT CHANGE
DO NOT CHANGE
FREEZER CONTROL
DO NOT CHANGE
DO NOT CHANGE
RIGHT ONE POSITION
LEFT ONE POSITION
• The freezer supplies the cold air for both compartments.
• The freezer setting determines the compressor and freezer fan "run times"
• The fresh food setting controls a damper between the two compartments which regulates
the amount of cold air that flows into the fresh food compartmenL
= Both controls may require adjustment to get an acceptable temperature in the fresh food
compartment.