INSTALL EASY CONNECT MOUNTING BRACKET:
Electrical
Box
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) • 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
SAFETY PRECAUTIONS:
Black (Live)
White
(Neutral)
Green (Ground)
Attach easy connect
mounting bracket
to electrical box with
electrical box screws
(not included).
Easy Connect
mounting
bracket
STEP 1
EASY CONNECT®
INSTALLATION INSTRUCTIONS
L
N
ET-2
01/18
STEP 4
STYLE#1- Tuck electrical wires into
outlet box and position fixture over
studs or nipple on mounting bracket
assembly. Secure fixture in place with
star washer(s) and cap nut(s).
Note: If required, assemble body and
spread the arms of the fixture out
evenly.
Star
Washer
Stud
Or
Nipple
Cap
Nut
Fixture
STYLE#1
STEP 5 - Optional for some models (
Note: Refer to the style of assembly that matches the style of your fixture.)
Tel: (613) 342-5424, Fax: (800) 263-4598
STYLE#2
Fixture Head
Decorative
Ring
Style#2
-
Install proper bulb
type and wattage. Install
decorative ring.
L
N
STYLE #1
STYLE #2
STYLE#1
“Pop Off”
Head Or
Glass
Fixture
Socket
Style#1
-
Snap “pop off” head or
glass onto fixture (push, or push
and turn (it depends on the style
of your fixture)). Install proper bulb
type and wattage.
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Fixture
Bracket
Screw
STYLE#2
STYLE #2 - Insert one screw into the
mounting bracket - do not tighten
yet. Tuck electrical wires into outlet
box and position fixture over the
mounting bracket. Line up the screw
in the bracket to the "7" hole on the
fixture. Slide fixture to secure in place.
Insert remaining screw. Tighten both
screws to secure.
NOTE: Product may not look exactly as shown in figures.
L
N
L
N
Connect (push) electrical
wires from electric box
(house wiring) into correct
inserts. Black (Live),
White (Neutral),
Green (Ground)
Connect (push) electrical wires from fixture into correct inserts.
Black (live), White (neutral), Green (ground)
For multiple black (live) &
white (neutral) wires joined
in the electrical box
(house wiring), attach a single
“black” and “white” Jumper Wire
before connecting. Strip 7mm
from a 6” Jumper Wires (AWG 12-24)
supplied. Then connect (push) wires
into correct inserts.
STEP 2 - Option 1
Jumper Wire
Jumper
Wire
Option 2 - MULTIPLE ELECTRICAL BOX WIRES
STEP 3
CONNECT LIGHT FIXTURE
CONNECT HOUSE WIRES
L
N
Light
Fixture
(L)
Black
(Live)
(L)
Black
(Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Green
(Ground)
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF
LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND
WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
