Loading ...
Loading ...
Loading ...
Installation
40
Burner and nozzle characteristics tables
The nozzles not provided are available at Authorised Service Centres.
5.3 Positioning
This appliance may be installed next to
walls, one of which is higher than the
worktop, at a minimum distance of X mm
from the side of the appliance, as shown in
figures “A” and “C” relative to the
installation classes.
Natural Gas G20 - 20 mbar AUX SR R UR
Rated heating capacity (kW)
1,0 1,8 2,9 4,0
Nozzle diameter (1/100 mm)
72 94 115 145
Pre-chamber (printed on nozzle)
(X) (Y) (Y) (Z)
Reduced flow rate (W)
400 500 800 1600
Natural gas G25 - 20 mbar AUX SR R UR
Rated heating capacity (kW)
1,0 1,8 2,9 3,9
Nozzle diameter (1/100 mm)
77 100 134 152
Pre-chamber (printed on nozzle)
(F1) (Y) (F3) (F3)
Reduced flow rate (W)
400 500 800 1600
LPG G30/G31 - 50 mbar AUX SR R UR
Rated heating capacity (kW)
1,0 1,8 2,9 3,8
Nozzle diameter (1/100 mm)
43 58 74 77
Pre-chamber (printed on nozzle)
(H2) (M) (Z) (F4)
Reduced flow rate (W)
400 500 800 1600
Rated flow rate G30 (g/h)
73 131 211 291
Rated flow rate G31 (g/h)
71 129 207 286
Heavy appliance
Crushing hazard
• Position the appliance into the cabinet
cut-out with the help of a second person.
Pressure on the open door
Risk of damage to the appliance
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
Heat production during appliance
operation
Risk of fire
• Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (not less than 90 °C).
Loading ...
Loading ...
Loading ...