Loading ...
Loading ...
Loading ...
en Installing the base station
22
¡ You can delay the natural wear by using
the following measures:
– Only charge the battery in the temper-
ature range between 0°C and 45°C.
– Only store the battery in the temperat-
ure range between -20°C and 50°C.
– Do not store the battery for an exten-
ded period of time if it is fully charged
or fully discharged.
Installing the base station
▶ Check whether any household wiring
could be damaged in the installation
area.
▶ Do not install the base station horizont-
ally or vertically above, below or next to a
socket.
→Fig. 3 - 6
Inserting and charging the bat-
tery
→Fig. 7 - 8
Charging
▶ Only use the battery in connection with
the Bosch appliance.
▶ Only charge the battery using the ori-
ginal charging cable.
▶ Only use batteries from the Power for
ALL 18V series.
Note:The power supply unit on the char-
ging cable
1
and the appliance heat up
while charging. This is normal and harm-
less.
Charging using the charging cable
→Fig. 9 - 10
Charging in the base station
▶ Ensure that children do not play with the
appliance, even when it is in the base
station
1
.
→Fig. 11 - 12
Charging using the quick charger
1
1. Press the release button and remove the
battery to the rear.
→Fig. 13
2. Observe the enclosed instructions.
Installing the appliance
→Fig. 14 - 15
Switching on the appliance
▶
Press
.
→Fig. 16
Setting the power
→Fig. 17 - 18
Vacuuming with accessories
→Fig. 19 - 20
Storing accessories
→Fig. 21 - 22
Using the flexible extension
hose
→Fig. 23 - 24
Cleaning the appliance
Requirement:The appliance is switched
off.
1. Disconnect the appliance from the char-
ging cable
1
.
2. Clean the appliance and the accessory
with a soft cloth and a commercially
available plastic cleaner.
Emptying the dust container
→Fig. 25 - 28
Cleaning the filter unit
▶ Never allow the filters to come into con-
tact with liquids.
→Fig. 29 - 35
Cleaning the power brush
→Fig. 36 - 38
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...