Loading ...
Loading ...
Loading ...
15
9. OPERATING INSTRUCTIONS
9.4 CUTTING HEAD - FIGS. 14 - 16
Check the nylon line regularly, when the
trimming performance decreases adjust the line
length.
Remove the plug from the power supply and
turn the machine over. Press button
completely. Pull the nylon line one stage.
Repeat this for the second line.
If the nylon line has disappeared inside the
spool, proceed by pressing in the two locking
tabs simultaneously. Raise the cover up to
access the reel. Take care if the reel contains
any residual nylon line as it will have a
tendency to uncoil rapidly. This will lead to the
line becoming tangled causing feed problems.
Pass the end of the line through the spool
apertures and position the reel over the spring.
While holding the reel down and preventing it
from spinning, relocate the cover ensuring the
tabs lock on both sides.
Clean the line length trimming blade of
grass to ensure a satisfactory cut is maintained.
After adjusting the trimming line length exercise
caution as you turn on the machine as the line
will be automatically cut to length to remove
any excess line. This can result in debris being
ejected from the cutting head area as the
excess line is removed by the line length
trimming blade/pin.
9.5 GENERAL CUTTING ACTION:
Sweep the trimmer from side to side
consistently to cut small patches of grass/weed.
This trimmer is not suitable and is not designed
to cut large areas of lawn.
When operating the trimmer observe what
direction the debris is ejected and position the
trimmer to avoid injury from stones etc.
FIG.14
FIG.15
FIG.16
Loading ...
Loading ...
Loading ...