Loading ...
Loading ...
Loading ...
11
English
Starting Mower (Fig.I–K)
DANGER: Sharp moving blade. Never attempt
to override the operation of the switch box and
safety key system as serious injury couldresult.
nOTE: Mower is operational when battery packs and safety
key areinstalled.
1. Install battery packs
20
into mower as described in
installing and Removing the Battery Packs.
2. Insert safety key
3
fully into the key port
22
. The mower
is nowoperational.
3. To operate the mower, push and hold the ON‑OFF
button
2
on the ON‑OFF switch box
1
, then pull the
bail handle
5
to the main handle
4
.
nOTE: Once the mower starts, you can release the ON‑OFF
button, but you must continue to hold the bail handle to the
main handle for the mower torun.
4. To turn the mower OFF, release the bailhandle.
WARNING: Never attempt to lock a switch or bail
handle in the ONposition.
nOTE: Once the bail handle has returned to the original
position it will activate the “Automatic Braking Mechanism”.
Safety Key (Fig.J)
DANGER: Sharp moving blade. In order to prevent
accidental start‑up or unauthorized use of your
cordless mower, a removable safety key
3
has been
incorporated into the design of your mower. The mower
will be completely disabled when the safety key has
been removed from themower.
DANGER: Rotating blades can cause serious
injury. To prevent serious injury, turn unit off and
remove safety key and battery packs when unattended,
or when charging, cleaning, servicing, transporting,
lifting, or storingmower.
This mower is designed to operate on two battery packs
of equal capacity. The mower will not operate on a single
battery pack, and If using different capacity battery packs, the
smaller capacity battery pack, when depleted, will cause the
unit to turnoff.
nOTE: For best results, make sure the battery packs
20
are
fullycharged.
To Install the Battery Packs
1. Lift and hold the battery port cover
9
up to expose the
battery ports
19
.
2. Slide a battery pack
20
into the battery port until an
audible click is heard. Repeat for the second battery
nOTE: Ensure the battery packs are fully seated and fully
latched intoposition before startingmower.
3. Close the battery port cover. Ensure the cover is fully
closed before startingmower.
To Remove the Battery Packs
1. Lift and hold the battery port cover up to expose the
batteryports.
2. Depress the battery release buttons
21
on the battery
packs and pull the battery packs out oftool.
Installing and Removing the Battery Packs
(Fig.I)
DANGER: MAKE CERTAIN THE SAFETY KEY IS
REMOVED TO PREVENT ACTUATION BEFORE
REMOVING OR INSTALLINGBATTERIES.
READ THIS INSTRUCTION MANUAL BEFORE
OPERATING YOUR MOWER
Refer to Figure A at the beginning of this manual for
a complete list ofcomponents. Save this manual for
futurereference.
DANGER: Sharp moving blade. Do not operate the
mower in mulching mode if the rear door is not closed
under spring tension as serious injury could result. Take
your mower to the nearest service center forrepair.
DANGER: Do not operate mower unless handle is
locked intoposition.
DANGER: Sharp moving blade. Never operate the
mower in bagging mode unless the bag hooks on the
grass collection bag are seated properly on the mower
and the rear discharge door rests firmly against the top
of the grass collection bag as serious injury couldresult.
WARNING: Let the mower work at its own pace. Do
notoverload.
Proper hand position requires both hands grasping the
main handle
4
and bail handle
5
together when not in
self‑propel mode; and both hands grasping the main handle,
bail handle, and self drive bail handle
14
together when in
self‑propel mode.
Proper Hand Position (Fig.A)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position asshown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
suddenreaction.
OPERATION
DANGER: To reduce the risk of serious personal
injury, turn unit off and remove the safety key and
battery packs before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can causeinjury.
nOTE: If you are not sure which height to cut, begin mowing
with the cut height adjustment lever positioned towards
therear.
To Set the Height of Cut
1. Pull the cut height adjustment lever out of the locking
notch
18
.
2. Move the lever towards the rear of the mower to raise the
height ofcut.
3. Move the lever towards the front of the mower to lower
the height ofcut.
4. Push the height adjustment lever into one of the
lockingnotches.
Loading ...
Loading ...
Loading ...