DWR-953V2 User Manual

Loading ...

43D-Link DWR-953V2 User Manual

Section 3 - Conguration

prex1/prex2

Enabled Click this to enable or disable the following prex-specic ags.

prex Enter the network prex or the address of the interface.

AdvOnLinkFlag Indicates that this prex can be used for on-link determination.

Click to set this to on.

AdvAutonomousFlag Indicates that this prex can be used for autonomous address

conguration. Click to set this to on.

AdvValidLifetime The length of time (in seconds) that the prex will be valid for

the purpose of on-link determination. Enter either an integer or

the word innity.

AdvPreferredLifetime The length of time (in seconds) that addresses generated

from the prex via stateless address autoconguration remain

preferred. Enter either an integer or the word innity.

AdvRouterAddr When set, indicates that the address of the interface will be sent

instead of the network prex. Click this to set it to on.

If6to4 If an IPv4 address is entered, the prex will be combined with the

IPv4 address to produce a valid 6to4 prex. This option allows

systems with dynamic IPv4 addresses to update their advertised

6to4 prexes by restarting RADVD or by sending a signal to

cause RADVD to recongure itself.

Loading ...

User Manual - Page 47