Loading ...
Loading ...
Loading ...
5
Installing the Ice Maker
Making preparations
Refer to the illustration below for the
following steps.
1.Pull the refrigerator away from the wall so
that you can easily access the rear panel.
5.
Electrical Shock Hazard
Disconnect power before installing
ice maker.
Failure to do so could result in death or
electrical shock.
WARNING
2.Unplug Refrigerator or disconnect power.
IMPORTANT:Make sure to protect the floor
from any damage.
3.
Open the freezer door and remove all of
the food items from inside the freezer
compartment.
NOTE: The work area for refrigerator-freezer
is shown in DETAIL A below.
4.
You will be
working in
these areas
left side
of freezer
compartment
Work area
Power
cord
plug and
receptacle
Rear wall
Detail A
On top-mount models without a full-width
freezer shelf, remove the ice tray shelf.
Place the shelf aside, as you will use it
later to support the ice bucket.
Remove the screw from the ice maker
connector & tube cover. Retain this
screw for ice maker installation.
Screw
Connector &
Tube Cover
Removing connector & tube cover
6.
Insert the end of a small-bladed screwdriver
under the edge of the ice maker mounting
hole plug in the side of the freezer liner, and
pry it out of its hole. You can discard the plug.
Mounting
Hole Plug
Shoulder Screws
NOTE: Verify the shoulder screws are in position.
Loading ...
Loading ...
Loading ...