Loading ...
Loading ...
Loading ...
19
Oven Controls
Add 1 Minute
Use the Add 1 Minute feature to set additional minutes to the
timer. Each press of the key will add 1 additional minute. If
Add 1 Minute is pressed when the timer is not active, the timer
will activate and begin counting down from 1 minute.
To add 2 minutes to the timer:
Press
Add 1 Minute twice.
Setting 12 Hour or 24 Hour Display Mode
The clock display mode allows you to select 12 hr or 24 hr
modes. The factory pre-set clock display mode is 12 hours.
To set 12 hr or 24 hr display mode:
1. Press and hold for 6 seconds.
2. Press the Up / Down arrow keys to toggle between 12 Hr
day or 24 Hr day display modes (See Figure 17).
3. Press to accept the choice.
Changing Between Continuous Bake Setting or 12 Hour
Energy Saving
The oven control has a factory preset built-in 12 Hour Energy
Saving feature that will turn off the oven if the oven is left on for
more than 12 hours. The control may be programmed to
override this feature to bake continuously.
To change between continuous bake or 12 hour energy saving
feature:
1. Press and hold Timer ON/OFF for 6 seconds
2. Press the Up / Down arrow keys to toggle between 12 Hour
OFF or Stay On feature (See Figure 18).
3. Press to accept choice.
Changing Temperature Display to Fahrenheit (ºF) or
Celsius (ºC)
The electronic oven control is set to display °F when shipped
from the factory. The display may be changed to show either °F
or ºC oven temperatures.
To change temperature display mode from °F to °C or from
°C to °F:
1. Press and hold Broil for 6 seconds.
2. Once F (or C) appears in the display, press the Up / Down
arrow keys to toggle between Fahrenheit and Celsius
temperature display modes (See Figure 19).
3. Press to accept the choice.
Important note:
The oven temperature display cannot be changed during the
cooking process or if a Delay Start has been set or Self Clean is
active.
Setting Silent or Audible Control mode
Silent mode allows the oven control to operate without audible
tones. The control may be programmed for silent operation and
later reset to operate with all the normal audible tones.
To set for silent or audible mode:
1. Press and hold Delay Start for 6 seconds.
2. Press the Up / Down arrow keys to toggle between bEEP On
or
bEEP OFF (See Figure 20).
3. Press to accept the choice.
Figure 17: 12 Hr dAy and 24 Hr dAy settings
Figure 18: 12 hr energy saving (L) and continuous setting (R)
Figure 19: Display showing Fahrenheit and Celsius
Figure 20: Display showing audible and silent operation
Loading ...
Loading ...
Loading ...