Sencor SVC 8300TI 4AAAA User Manual

Loading ...

11/2019

- 6 -

Bagged Vacuum Cleaner

User'smanual

■ Prior to using this appliance, please read the user’smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user’smanual in asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

DESCRIPTION OF THE VACUUM CLEANER AND ITS ACCESSORIES

A1 Automatic power cord winding

button

A2 Filter handle

A3 Electronic suction power control

A4 Lid of storage area for dusting brush

and crevice nozzle

A5 Full dust bag indicator

A6 Lock for lid of storage area

A7 Flexible hose connection hole

A8 Top cover lock

A9 Integrated handle

A10 On/Off button of the vacuum

cleaner

A11 Groove for the horizontal parking

position

A12 Rubber-coated rear travel wheel

A13 Front rotating travel wheel

A14 Groove for the vertical parking

position

A15 Removable grill of the outflow HEPA

filter

A16 Washable outflow HEPA filter

is placed behind the grill.

A17 Dust bag*

A18 Dust bag holder

A19 Grill of the inflow micro-filter

A20 Washable inflow micro-filter

is placed in the grill.

A21 Flexible hose

A22 XXL telescopic metal tube

A23 Floor nozzle with an extensible

brush and DEEP cleaning and EASY

cleaning switch

A24 Flap for extending and retracting

the brush

A25 Long flexible crevice nozzle

A26 Dusting brush

A27 Crevice nozzle

Note:

One disposable synthetic dust bag is included with the product.

Synthetic dust bags last longer, are more durable and provide better

filtration than standard paper bags.

Note:

The dusting brush A26 and crevice nozzle A27 are stored in the storage

area under the lid A4.

INTENDED USE OF THE ACCESSORIES

■ The universal floor nozzle with an extensible brush A23 is intended for all floor

types. Extend the brush when vacuuming smooth hard floors, and retract it when

vacuuming carpets. To extend and retract the brush, use flap A24 on the floor

nozzle A23. Floor nozzle A23 also has aswitch for extending out atravel roller. This

switch is located in the centre of the floor nozzle A23 and it has two positions - deep

cleaning and easy cleaning. The deep cleaning position (the travel roller is retracted)

is ideal for deep and thorough vacuuming of carpets. The easy cleaning position

(the travel roller is extended) makes movement over the vacuumed surface easier.

We recommend to slightly lift up the floor nozzle A23 when you wish to switch to

the easy cleaning position.

■ The long flexible crevice nozzle A25 serves to vacuum very hard-to-reach places

anywhere in your car.

■ The crevice nozzle A27 can be used for vacuuming hard-to-reach places and the

dusting brush A26 is used for vacuuming various types of furniture.

PREPARING FOR USE

■ Make sure that the dust bag A17, inflow micro-filter A20 and outflow HEPA filter

A16 are properly installed.

■ Insert the end of the flexible hose A21 into the hole A7 and turn it clockwise to

secure it in place.

Note:

For removal, turn the end of the hose A21 anticlockwise and pull it out

of the hole A7.

■ Attach the telescopic tube A22 on to the handle of the flexible hose A21. Slide the

ring that is located on the telescopic tube A22 towards the handle of the flexible

hose A21 to release the extension lock on the telescopic tube A22. After releasing

the lock, set the length of the tube A22 by sliding its extensible part in or out. When

the ring is released, it will lock in at the set length.

■ Select the type of accessory that you wish to use and attach it to the free end of the

telescopic tube A22. Certain types of accessories such as for example A25, A26 or

A27 are attached directly on to the handle of the flexible hose A21.

USING THE VACUUM CLEANER

■ Pull on the power plug to wind out the required length of the power cord and

connect it to apower socket.

Attention:

The yellow mark on the power cord indicates the approaching

end of its length, and the red mark indicates the complete end of

its length. Do not attempt to pull the power cord past this mark.

■ To start the vacuum cleaner, press button A10. Suction power can be set using the

electronic control A3 or the mechanical flap on the handle of the flexible hose A21.

■ When you have finished using the vacuum cleaner, turn it off by pressing button

A10 and disconnect the power cord from the power socket. To wind the power cord

back into the vacuum cleaner, press and hold button A1 until its entire length is

wound up. Gently hold the power cord with one hand while winding it up.

Note:

If the power cord is not wound up completely, release button A1, and

pull the power cord out of the vacuum cleaner by approximately 50 cm

and then try again to wind it up.

PARKING POSITION OF THE VACUUM CLEANER

■ When not using the vacuum cleaner, you may put it in the parking position. For the

horizontal parking position, slide the stopper on the nozzle A23 or into the groove

A11, see fig. B1.

■ For the vertical parking position, first set the shortest length of the telescopic tube

A22. Then put the vacuum cleaner into avertical position and slide the stopper on

the nozzle A23 into the groove A14, see fig. B2.

MAINTENANCE AND CLEANING

■ Before cleaning it, always make sure that the vacuum cleaner is turned off and

disconnected from the power socket.

Changing the dust bag

■ The red coloured indicator A5 signals the need to replace the dust bag A17.

■ Release the lock A8 and tilt open the top cover of the vacuum cleaner. Remove the

used dust bag A17 from the holder A18 and insert anew bag intended for this type

of avacuum cleaner in its place. After replacing the bag A17, close the top cover

of the vacuum cleaner. It will not be possible to close the top cover of the vacuum

cleaner unless the bag is correctly inserted in the holder A18.

■ If the dust bag is not replaced in time, the vacuum cleaner’ssuction power will be

reduced.

Cleaning and replacing the inflow micro-filter and the outflow HEPA filter

■ Release the lock A8 and tilt open the top cover of the vacuum cleaner. Slide the grill

A19 out of the vacuum cleaner and take the micro-filter A20 out of it. Rinse it under

running lukewarm water and allow to dry naturally. Then reinsert it and close the

cover. In the event that the micro-filter A20 is showing signs of wear or it is heavily

soiled, replace it with anew one.

■ Release and remove the grill A15. Remove the HEPA filter A16 from the vacuum

cleaner. In the case of light soiling, tap it out. We recommend doing this away from

living areas. In the event of greater soiling, wash it under aweak current of running

lukewarm water so that the water washes the dirt out of the folds. Allow the HEPA

filter A16 to dry naturally, then reinsert it and secure it in place with the grill A15.

It is recommended to replace the HEPA filter with anew one after 6 months of use.

■ When filters are soiled, their effectiveness is reduced, so do not neglect their

cleaning.

Attention:

Before putting the filters back into the vacuum cleaner, make

sure that they are completely dry.

Cleaning the flexible hose, telescopic tube, floor nozzle, flexible crevice nozzle,

small crevice nozzle and the dusting brush

■ If the accessories are soiled, take them out and clean away all dirt (dust, hair, animal

fur, etc.).

Cleaning the outer surface of the vacuum cleaner

■ Clean the outer surface using a dry or a lightly dampened cloth. Then wipe it

thoroughly dry.

■ For cleaning the vacuum cleaner, do not use steel wool, abrasive cleaning products,

solvents etc.

■ Do not submerge the vacuum cleaner under water or any other liquid and do not

rinse it under running water.

■ TECHNICAL SPECIFICATIONS

Rated voltage range ............................................................................................................ 220−240 V

Rated frequency........................................................................................................................50/60 Hz

Rated power input ........................................................................................................................ 800 W

Electrical shock protection class ........................................................................................................ II

Noise level ...................................................................................................................................68 dB(A)

Dust bag capacity...................................................................................................................................3l

HEPA filter efficiency class .............................................................................................................. H13

Length of the power cord ..............................................................................................................8 m

Operational radius .......................................................................................................................... 11 m

The declared noise emission level is 68 dB(A), which represents a level Aof sound

power with respect to areference sound power of 1 pW.

Loading ...

Sencor SVC 8300TI 4AAAA Bagged Vacuum Cleaner

User Manual - Page 6