Loading ...
Loading ...
Loading ...
13
Note: It can be set to automatically turn o or on in 0.5-24 hours. Each press of the
buttons should increase or decrease the timer. The Timer can be set in 0.5 hours increment below 10
hours and 1 hour increment for 10 hours or above. The Set light should turn on while setting.
To cancel the Set function, press the TIMER button again.
6. Eco Mode – In Eco mode, the unit is designed to turn o once the room is cooled to the user-
set temperature. The unit should turn back on when the room temperature rises above the
user-set temperature. While in Eco mode, the fan is designed to occasionally turn on for a few
seconds in order to take an accurate temperature reading.
The unit should turn back on when the room temperature rises above the user set temperature.
Before the compressor starts, the fan motor is designed to run for a while, then it should stop for a
while. The process should continue to repeat to save energy while creating a
comfortable environment.
7. Sleep Button – In Sleep mode, all of the display lights should turn o after a while, but the
Sleep light stays on. In Sleep mode, the air conditioner is designed to automatically adjust
the temperature and fan speed to make the room more comfortable during the night. The set
temperature should automatically raise every 30-60 minutes, and at most change six times until
the set temperature is 81 or 82 degrees.
8. Fan Speed – Press the Fan Speed button to choose the fan speed options. You can choose Hi,
Med, Lo or auto speed in cool mode and choose Hi, Med, Lo in fan mode.
9. Filter Button – After the fan motor has run for 500 total hours, the Filter Check light should
turn on to remind the user to clean the filter. After you clean the filter, you can turn o the light
by pressing the Filter button.
10. Directional Louvers: To direct the airflow horizontal wheel to control the horizontal direction,
air deflector to control the vertical direction.
Operating Your Air Conditioner
Remote Control
1. POWER: Turn the air conditioner on and o.
2. COOL: Press the COOL button to start COOL mode.
3. Up and Down: Use these buttons to increase or decrease the
temperature. The Set light should turn on after selecting the
desired temperature. Decrease the Set Temperature or Timer.
Temperature range: 61 ~88 Fahrenheit or 16 ~31 Celsius.
4. SLEEP: Press the Sleep button, all of the display lights should
turn o after a while, but the sleep light is always on. In this
mode, the air conditioner is designed to automatically adjust the
temperature and fan speed to make the room more comfortable
during the night. The set temperature should automatically
change every 30-60 minutes and at most change six times until
the set temperature is 81 or 82 Fahrenheit for cooling and 75
or 76 Fahrenheit
for heating.
5. TIMER: Use these buttons on the control panel and remote to set
Loading ...
Loading ...
Loading ...