Loading ...
Loading ...
Loading ...
Operation
Quick start guide
Place the charging base against the wall and remove
all the obstructions within range of 1 m at both side
and 2 m ahead as shown on the right figure, and then
connect the adapter and power supply. The power
indicator on the charging base will keep on.
Charging base
Turn on the power switch at the bottom. 3 button lights going on means the
machine enter the Standby mode.
!Warning Be sure to turn on the power switch before the charging to avoid the
charging failure.
A.When the battery is low, “ ” is flashing quickly.
B.When the charging is in progress, “ ” is flashing slowly.
C.After charging is completed, “ ” stops flashing and keeps on.
D.The first charging shall last at least 12 hours.
E.
Generally place the machine on the charging base and ensure that the charging
base is connected to the power supply.
F.Check the charging status after battery has run out.
G.If the product is not in use for long time, turn off the power switch first.
2.
A.
B.
Plug the jack of power adapter directly into the socket of machine and
connect the other end to the power supply as shown in Fig.A.
At Selection mode, press the Return button of remote controller or “ ”
button on the machine to automatically return to the charging base as shown
in Fig.B
!Caution: When charging base is working, press “Start/Pause” button on the
remote controller or “ ” button on the machine to stop charging and start
cleaning. When the adapter is used for charging, this operation is invalid.
3.Charge the machine in one of following two ways.
!Caution:
Charging base
1.
8
Loading ...
Loading ...
Loading ...