Loading ...
Loading ...
Loading ...
8
Handling
CAUTION
Switch the device off and disconnect the power supply after every use and before every cleaning.
•
Make sure that all moving parts can move freely at all times.
•
Make sure that no hair can get caught in the device.
•
Avoid contact with sharp or pointed objects.
•
Do not kink the cable.
•
Make sure that the device is not too close to heat sources such as ovens, radiators or direct
sunlight.
Disposal
CAUTION
Follow local regulations regarding the disposal of materials. The appliance should be dis-
posed of according to Regulation 2002/96/EC-WEEE (Waste Electrical and Electronic
Equipment). In case of queries, contact the municipal authorities responsible for waste
disposal in your area.
4. Appliance description
1 On/off switch
O: Off
M: Vibration massage
M+H: Vibration massage with heat function
2 Infrared light
3 Interchangeable massage attachments
5. Start-up
•
Remove the packaging.
•
Check the device, power supply and cables for damage.
•
Connect the device to the mains power supply. The device must be switched off.
•
Route the cable safely so that there is no risk of anyone tripping over it.
6. Operation
Make sure that the device is switched off before inserting the power cable. Switch the device on by moving
the switch to the desired massage setting “M” or “M+H”.
Guide the device with both hands to the area of the body to be massaged. You can stand, sit or lie down
and can massage yourself or another person. The massage intensity can be altered by pressing more or
less firmly with the massage device. Do not massage a certain site of the body for longer than 3 minutes
and then change to other area of the body.
Note
Do not use the massage device just before going to bed. The massage can also have a stimulating
effect and may cause difficulties in getting off to sleep.
1
2
3
Loading ...
Loading ...
Loading ...