Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
14
Completing the installation
Test cycle
Ensure the test cycle is completed before you dry any items in your dryer. The test cycle is
to check that your dryer is installed correctly and that it is functioning properly prior to use.
1
Press POWER to activate your dryer.
3
Press , the drum will start rotating.
Observe the dryer for any problems.
The dryer will beep and display any faults on
the screen if there are any problems, refer to
‘Before you call for service’, ‘User warnings’.
At the completion of the cycle, open
the door and check that there is warmth
inside thedryer. This indicates the dryer is
operating normally.
Select the TIME DRY cycle for 30 minutes.
Ensure the drum is empty and the door
isclosed (you will hear it click shut).
2
If there are any problems, you must address these before proceeding with normal use. The
dryer will automatically turn off at the end of the cycle if there are no problems.
Loading ...
Loading ...
Loading ...