Loading ...
Loading ...
Loading ...
2. Removing Refrigerator Handle
NOTE: To assist in installing the handle on the right
side, place a small piece of masking tape near the
top of the handle before removing.
• Grasp the handle tightly with both hands and slide the
handle up (1)(this may require some force).
• The keyhole slots (2) on the back of the handle allow
the handle to separate from the mounting screws (3).
• Use an adjustable wrench to remove the handle
mounting screws (3).
• Carefully pry off the plug buttons (4).
• Remove a layer of adhesive and backing to expose
new adhesive.
• Install the plug buttons (4) on left side.
• Install the handle mounting screw (3) on the right side
• Hold the handle so the masking tape is at the bottom.
• Align keyhole slots (2) on the top and bottom of the
back of the handle with the screws (3) mounted on
the front of the door.
• Press the handle against the door front, making sure
that the screws (3) go into the keyhole slots (2).
• Grasping the handle with both hands, press it firmly
against the front of the door and slide the handle
down (6). This may require some force.
®
Scmws
moun_d
ondoor
on back of
handle
/®
®
Keyhole slots
on back of
handle
®
Screws
mounted
ondoor
10
Loading ...
Loading ...
Loading ...