Loading ...
Loading ...
Loading ...
49-80808 29
TROUBLESHOOTING TIPS
Troubleshooting Tips ... Before you call for service
Problem Possible Cause What To Do
Unable to set cook time or
delay time
You forgot to enter a cooking mode
first.
See the Options section
Oven racks are difficult
to slide
The shiny, silver-colored racks were
cleaned in a self-clean cycle.
Apply a small amount of vegetable oil to a paper towel and
ZLSHWKHHGJHVRIWKHRYHQUDFNVZLWKWKHSDSHUWRZHO'R
not spray with Pam
®
or other lubricant sprays.
Drawer does not slide
smoothly or drags
The drawer is out of alignment. Fully extend the drawer and push it all the way in See the
Care and cleaning of the range section.
Drawer is over-loaded or load is
unbalanced.
Reduce weight. Redistribute drawer contents.
Steam from the vent When using the ovens, it is normal
to see steam coming out of the
oven vents. As the number of racks
or amount of food being cooked
increases, the amount of visible
steam will increase.
This is normal.
Water remaining on oven
floor after Steam Clean
cycle
This is normal. Remove any remaining water with a dry cloth or sponge.
Oven will not steam clean Display flashes HOT. Allow the oven to cool to room temperature and reset the
controls.
Oven controls improperly set. 6HHWKH8VLQJ6WHDP&OHDQVHFWLRQ
Oven door is not closed. Make sure you close the door to start steam clean cycle.
Display prompts for Probe
Temperature
This is reminding you to enter a
probe temperature after plugging in
the probe.
Enter a probe temperature.
Loading ...
Loading ...
Loading ...