Loading ...
Loading ...
Loading ...
Cleaning the Dishwasher
Clean the exterior of dishwasher with a soft, damp cloth and mild
detergent. If your dishwasher has a stainless steel exterior, a stainless
steel cleaner is recommended - Stainless Steel Cleaner and Polish Part
Number 31462A.
Removal of Hard Water / Filming: Recommended use of a monthly
maintenance product such as affresh
®
Dishwasher Cleaner Part
Number W10282479.
Load your dishwasher (preferably with dishes affected by filming/
hard water).
Place tablet in main wash compartment of detergent dispenser.
Select cycle/option best for heavily soiled dishes and start
dishwasher.
NOTE: Recommended to use a premeasured detergent tablet
or pack for regular daily use.
If you have a drain air gap,
check and clean it if the
dishwasher isn't draining well.
To Reduce Risk of Property Damage During Vacation or
Extended Time Without Use:
When you will not be using the dishwasher during the summer
months, turn off the water and power supply to the dishwasher.
Make sure the water supply lines are protected against freezing
conditions. Ice formations in the supply lines can increase water
pressure and cause damage to your dishwasher or home.
Damage from freezing is not covered by the warranty.
When storing your dishwasher in the winter, avoid water
damage by having your dishwasher winterized by authorized
service personnel.
Dries dishes with heat. This option, with the
use of rinse aid, will provide the best drying
results. Plastic items are less likely to deform
when loaded in the top rack. Use Heat Dry for
optimum drying performance or turn the Heat
Dry option off for air dry.
Available
with any
cycle
Uses heating element
at end of cycle for
better drying results.
49 49 0
Runs dishwasher at a later time. Close
door firmly and select a wash cycle and
options. Press 4-HOUR DELAY. Press
START/RESUME.
NOTE: Anytime door is opened (such as,
to add a dish), START/RESUME must be
pressed again to resume delay countdown.
Available
with any
cycle
Delays start of a cycle
up to 4 hours
.
240 240 0
Control
Lock
Avoids unintended use of dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Control Lock, press and hold 4 HOUR DELAY for 3 seconds. Control Lock light will stay on for a short time, indicating that
it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked, light flashes 3 times. Dishwasher
door can still be opened/closed while the controls are locked.
To turn off Control Lock, press and hold 4 HOUR DELAY for 3 seconds. Control Lock light turns off.
OPTIONS CAN BE
SELECTED
WITH
WHAT IT DOES ADDED TIME TO CYCLE ADDED
WATER
GALLONS
(LITERS)
TYPICAL MAX
Control Purpose Comments
Press to start
or resume a
wash cycle.
If the door is opened during a cycle or the power is interrupted, the Start/Resume button LED flashes. Cycle
will not resume until door is closed and START/RESUME is pressed.
Press to cancel
wash cycle.
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let dishwasher drain completely.
To follow progress
of your dishwasher
cycle.
The Clean indicator glows when a cycle is finished.
DISHWASHER CARE
Loading ...
Loading ...
Loading ...