Loading ...
Loading ...
Loading ...
EN-8
EN
Vacuum Cleaner
SVC 6900GR 4AAAA ECO POWER
Copyright © 2019, Fast ČR, a.s. Revision 05/2019
A1 Cord winding button
A2 Full dust bag indicator
A3 Vacuum hose connection hole
A4 Clip for locking and releasing the lid
A5 Cover of the outow HEPA lter
A6 Motor power control dial
A7 START/STOP button
A8 Rubber-coated wheel
A9 Handle
A10 Sliding ap for air suction
A11 Telescopic tube
A12 Clip for the telescopic tube
A13 Floor nozzle
A14 Flap position for vacuuming carpets
A15 Flap position for vacuuming hard (smooth) oors
A16 Hose
A17 Accessory holder
A18 Stopper for the horizontal and vertical parking
position
A19 Clip
A20 Hose end
A21 Horizontal parking position
A22 Power cord
A23 Carry handle
A24 Front travel wheel with swivel mechanism
A25 Vertical parking position
A26
Telescopic slot nozzle for vacuuming in hard to reach
places (e.g. windows, corners, book shelves, areas
between mattresses, upholstery, etc.)
A27 Upholstery nozzle with an additional brush
A28 Long exible crevice nozzle
A29 Dust bag collar
A30 Dust bag
A31 Dust bag holder
A32 Inow micro-lter
A33 Grill of the inow micro-lter
A30 Outow micro-lter
A35 Outow HEPA lter
A36 Grill of the outow micro-lter and HEPA lter
ASSEMBLY
Inserting the hose into the air suction hole on the vacuum cleaner:
Press both the safety buttons on the end of the hose A20 end and insert the hose end A20 into the air suction opening
A3 on the vacuum cleaner until you hear a“click”. The hose A16 is now secured in the correct position.
Attach the holder to the telescopic tube:
Make sure to place the holder with the hose on the wider part of the telescopic tube A11.
Attach the oor nozzle to the telescopic tube:
Make sure the oor nozzle A13 is attached the narrower part of the telescopic tube A11.
Adjust the length of the telescopic tube:
Adjust the length of the telescopic tube A11 as required – disengage and hold the clip A12 on the tube A11 in the
direction shown by the arrow and adjust the length of the tube A11 as required. Then release the clip A12 and slide
out the tube A11 slightly forward until you hear a“click”. The telescopic tube A11 is now securely xed in position.
USING THE VACUUM CLEANER
Connecting your vacuum cleaner to the power grid
Wind out the required length of the power cord A22 by pulling on the power plug. Insert the power plug into apower
socket.
Caution:
Yellow marking on the power cord warns that the power cord is close to its end. Do not pull the cord
further than the red marking.
Loading ...
Loading ...
Loading ...