Loading ...
Loading ...
Loading ...
ENG - 15
Mode & Level Settings
Function LED Behavior Description
AV Delay
LED at the
bottom indicates
no delay.
SETUP > AV Delay > Use the Next/Previous buttons to increase/decrease the amount of
audio delay. The LED indicators will move to the top with increasing audio delay level.
Reset Audio or
Reset All
All LEDs will ash
3 times when
settings are reset.
SETUP > Reset Audio or Reset All > Use the Next/Previous buttons to reset either Audio
or All settings. Press the OK button to select.
Audio - Only audio settings, such as bass and treble levels, will be reset.
All - All paired Bluetooth devices will be unpaired and all settings will be lost. All
programmed IR remotes will also be removed. See the
Factory Reset on page 17
for
more information.
Speaker Test
—
SETUP > Spkr Test > OK to activate the speaker test function. A voice will begin calling out
each speaker beginning with
left
(Left, Right, and subwoofer-white noise). If any of these are
missing, check the connection and run the speaker test function again.
VIZIO Remote
Remote On
SETUP > VZtvRmt > Use the Next/Previous buttons to enable/disable VIZIO TV
Remotes. When enabled (On), you can use a VIZIO TV remote control to turn on the sound
bar (using the TV Volume Up button) and control volume.
Remote O
DTS TruVolume
TruVolume On
EFFECT > TruVol > Use the Next/Previous buttons to enable/disable TruVolume. When
enabled (On), TruVolume provides a consistent and comfortable volume level for a more
enjoyable listening experience.
Note: Default setting is O.
TruVolume O
AV Delay
Reset All
Spkr Test
VZtvRmt
TruVol
Loading ...
Loading ...
Loading ...