Loading ...
Loading ...
Loading ...
This Owner's Guide provides specific operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
• Choose a place that is near a grounded electrical outlet
Do Not use an extension cord or an adapter plug.
• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
The refrigerator must be installed on a floor that islevel
and strong enough to support a fully loaded refrigerator.
Consider water supply availability for models equipped
with an automatic ice maker.
INSTALLATION
DONot install the refrigerator where
the temperature will drop below 55°F (13°c) or rise
above l !O_F(43°C), The compressor will not be able
to maintain proper temperatures inside the
refrigerator,
DONOtb 0C.thetoeg.,eon
lowerfront of your refrigerator.Sufficient air circulation
is essential for the proper operation of your
refrigerator.
Installation Clearances
• Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8"
Back 1"
DOOR OPENING
NOTE: !f you refrigerator is placed with the door hinge
side against a wal!; you may have to allow additional
space so the door can be opened wider.
Your refrigerator should be positioned to allow easy access
to a counter when removing food. For best use of drawers
and freezer baskets, the refrigerator should be in a
position where both the refrigerator and freezer doors can
be fully opened.
TOE GRILLE INSTALLATION / REMOVAL
To Remove Toe Grille:
1. Open freezer and fresh foodcompartment doors.
2. Working from left side oftoe grille,slipyour fingers between
topoftoegrilleandcabinet.Gentlypullforwarduntilfirstsetof
tabsare free.Slideyour handdown pastthefreetabs and pull
forward again untilthesecond set oftabs are free. Continue
this process untilall tabs are free and thetoe grille can be
removed. (See graphic attop ofpage in rightcolumn.)
To Install Toe Grille:
1. Open freezer and Cabinet
fresh food
compartment doors.
2. Line up toe grille at
base of refrigerator,
making sure the four , .._..,.
bottom tabs are / "._
resting through holes ,,
at base of cabinet.
3. Starting from left side
of toe grille, press in on first top tab using your thumb
and push toe grille forward until itsnaps in place.
Continue this process until all tabs are snapped in place
and toe grille is secured to refrigerator.
LEVELING
All four corners of your refrigerator must rest firmly on a
solid floor.Your refrigerator is equipped with adjustable
front rollers to help level your unit. To ensure proper door
seal and assist door closing, the refrigerator should be
tilted 1/4" (6 mm), front to back.
To Level Your Refrigerator:
1 Remove toe grille (See "ToRemove Toe Grifle")
2 Use flat-blade screwdriveror 3/8" socket wrench
to adjust front rollers
NOTE: The refrigerator doors are designed to Shut by
themselves within a 2Odegree open ng.
Raise
3. Check both doors to be sure seals touch cabinet on all
four sides.
Loading ...
Loading ...
Loading ...