Loading ...
Loading ...
Loading ...
Use this rinse cycle for rinsing dishes, glasses,
and silverware that will not be washed right
away.
Do not use detergent with the rinse cycle.
Pre- Rinse Main Rinse Purger Rinse Dry Time Water
Wash Wash (rain) Usage
(gaUL)
• to 2:2/82
* Expect longer cycle times if water entering the dishwasher is
not hot enough.
t A small amount of water is run through the pump to r_move
soil particles between the main wash and final rinse.
Canceling a Cycle
Anytime during acycle, pres_
CANCEL glows. The dishwasher pauses for 5 seconds and
starts a 2 minute drain (if needed). Let the dishwasher
drain completely. The light goes off when the dishwasher
finishes the drain.
Changing a Cycle or Setting
During the first 2 minutes of a cycle
1. Press a new cycle and/or option(s).
2. Check the detergent dispensers. They must be filled
properly for the new cycle.
After the first 2 minutes of a cycle
Press
CANCEL glows. The dishwasher pauses for 5 seconds and
starts a 2 minute drain (if needed). Let the dishwasher
drain completely.
1. Check the detergent dispensers. They must be filled
properly for the new cycle.
2. Close the door.
3. Press a new cycle and/or option(s).
4. Press START.
Adding ItemsDuring aCycle
You can add an item anytime before the main wash starts.
1. Lift up the door latch to stop the cycle. Wait for the
spraying action to stop before opening the door.
2. Open the door and add the item.
3. Close the door, but do not latch it. Wait 30 seconds for
the air in the dishwasher to warm up. This reduces the
amount of moisture escaping from the vent when
restarting a cycle.
4. Close the door firmly until it latches. The dishwasher
resumes the cycle after about a 5 second pause.
Option Selections
You can customize your cycles by pressing an option. If
you change your mind, press the option again to turn the
option off. Select a different option if desired.
You can change an option anytime before the selected
option begins. For example, you can press an unheated
drying option any time before drying begins.
Press START to use the same cycle and option(s) as the
previous wash cycle.
NOTE: If the last cycle you completed was a rinse cycle,
when you press Start, the dishwasher runs the lastfull
wash cycle and option(s).
Super Scrub (on some models)
Select this high-temperature option for improved cleaning
of heavily soiled dishes. Selecting this option adds heat
and wash time to the wash cycle. Heating the water helps
improve washing results.
NOTE: Super Scrub is an option with the Soak & Scrub
and Normal cycles.
High Temp Wash (on some models)
Select this option to heat the water to 140°F (60°C) in the
main wash cycle. Selecting this option adds heat and
wash time to the Normal cycle. Heating the water helps
improve washing results.
®
NOTE: The Soak & Scrub cycle automatically uses this
option. High Temp Wash is an option with the Normal
cycle.
12
Loading ...
Loading ...
Loading ...