Loading ...
Loading ...
Loading ...
EN
Preparation
31
INSERTING/REMOVING THE MEMORY CARD
The camera will save exposures to an SD (Secure Digital), SDHC
(High Capacity) or SDXC (eXtended Capacity) memory card.
Notes
• SD/SDHC/SDXC memory cards are available from various
suppliers in various sizes and with differing read/write speeds.
Memory cards with high storage capacities and high read/write
speeds offer quick storage and rendering.
• The memory card may not be supported (capacity) or will have
to be formated before first use (see p.109). The camera will in
that case display a relevant message. Please see the section
"Technical Data" for information about supported cards.
• Check the memory card for correct alignment if you are having
difficulties inserting it into the camera.
• See p. 10 and p. 13 for additional information.
• Removing the bottom cover or the memory card while the
camera is switched on, or switching on the camera while the
bottom cover is not attached will trigger the following warning
message on the display:
–
Bottom cover removed.Bottom cover removed.
– No card available.No card available.
The memory card slot is located directly next to the battery
compartment.
▸ Ensure that the camera is switched OFF (see p.42)
▸ Open the bottom cover and close it again afterwards (see p.
32)
INSERTION
REMOVAL
Loading ...
Loading ...
Loading ...