Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE .,_ ./._/_/_
F, L,.BATES
Check Brake Operation _
Check Tire Pressure
Check Operator Presence and
T Interlock Systems
R Check for Loose Fasteners _ V'7
Sharpen/Replace Mower Blades
T Lubrication Chart If
0 Check Baffery Level
R Clean Battery and Terminals V'
Check Transaxle Cooling ll_
Adjust Blade Belt(s) Tension VPs
Adjust Motion Drive Belt(s) Tension II_s
Check Engine Oil Level If If
Change Engine Oil 1_1,2,: If
E CleanAi'Filter l_:
N Clean Air Screen
G Inspect Muffler/SparkAn'ester If
N_ Replace Oil Filter (If equipped) _.2
E Clean Engine Cooling Fins I V_z
Replace Spark Plug If
Replace Air Filter Paper Cartridge IkS'2
Replace Fuel Filter V p
1 - Change more often when opereling under e heavy load or in high annb_nt tei_peratur e_. 5 - If _Kluipped with adjustable system.
2 - See'ice more often when operating in ditty or dusly cortdition_.
3 - If e,quipped with oil filter, change o_1every 50 hours.
4 - Replace blades more often when mowing In ser_ly soil.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual. Some
adjustments will need to be made periodi-
cally to properly maintain your tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
, Check engine oil level.
0 Check brake operation.
* Check tire pressure.
, Check operator presence and interlock
systems for proper operation.
, Check for loose fasteners.
6 - Not re_4Jired if equ_ped with mldntenance-/ree batt eej,
7 - TigMe_t front axle pivot bolt to 35 ft.-Ibs, mQximu m,
Do _0t overtighten.
LUBRICATION CHART
Spindl_ Spindle
Zerk
Wheel
O Front Wheel
Bearing
Bearing Zerk Zerk
O Engine
0 Attachrnenl_ ,_
Clutch i ,
i I
Pivot(s) '
0 j
,-_ Shift
f.... Pivots
O SAE 30 or 10w30 Motor OIL
O General Purpose Grease
O Refer to Maintenance "Engine" Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bear-ings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating
bearings. If you feel they must be lubricated,
use only a dry, powdered graphite type lubri-
cant sparingly.
18
Loading ...
Loading ...
Loading ...