Loading ...
Loading ...
Loading ...
3
IMPORTANT SAFEGUARDS
Before the ice maker is used, it mus
t be properly positioned and installed as
described in this manual, so read the manual carefully. SUMMIT®
APPLIANCE strongly recommends that you have a professional install your
new machine. The warranty may be affected or voided by an incorrect
installation. To reduce the risk of fire, electrical shock or injury when using the ice maker,
follow basic precautions, including the following:
Plug into a grounded 3-prong outlet; do not remove grounding prong, do not use an
adapter, and do not use an extension cord.
It is recommended that a separate circuit, serving only your ice maker, be provided. Use
recep
tacles that cannot be turned off by a switch or pull chain.
Do not connect or disconnect the electric plug when your hands are wet.
Never unplug the ice maker by pulling on the power cord. Always grip the plug firm
ly
and pull straight out from the outlet.
Never clean ice maker parts with flammable fluids. Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of this or any other appliance.
The fumes
can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line
of the unit is disconnected and the water line is shut of
f.
Before operating, put all panels back into place.
Never allow children to operate, play with or crawl inside the ice m
aker.
Do not touch the evaporator with your hand when the machine is operating.
Unplug the ice maker or disconnect power before cleaning or servicing. Failure to do
so can result in electrical shock or death.
Do not attempt to repair or replace any part of your ice maker unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified
technician.
Use two or more people to move and install the ice maker. Failu
re to do so can result in
back or other injury.
Never install or operate the unit in an enclosed area, such as a closed cabinet. To ensure
proper ventilation for your ice m
aker, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 50°F (10°C) and
Loading ...
Loading ...
Loading ...