Smeg SO6102M2S SpeedwaveXL Galileo Oven 60cm

User Manual - Page 6

For SO6102M2S.

PDF File Manual, 37 pages, Download pdf file

Loading ...
Loading ...
Loading ...
48 - PRECAUTIONS 914779557/C
move this appliance.
For pyrolytic appliances
When the pyrolitic function is in
use, the surfaces could reach
temperatures that are higher
than usual. Keep children at a
safe distance.
Before starting the pyrolytic
cycle, remove any food
residues or large spills from
previous cooking operations
from the inside of the oven.
Before starting the pyrolytic
cycle, remove all accessories
from the oven cavity.
Before starting the pyrolytic
cycle, switch off the burners or
electric hot plates of the hob
installed above the oven.
Installation and maintenance
THIS APPLIANCE MUST NOT
BE INSTALLED IN A BOAT OR
CARAVAN.
The appliance must not be
installed on a pedestal.
Position the appliance into the
cabinet cut-out with the help of
a second person.
To prevent any possible
overheating, the appliance
should not be installed behind
a decoration door or a panel.
Installation and servicing should
be carried out by qualified
personnel in accordance with
current standards.
Have the electrical connection
performed by authorised
technical personnel.
The appliance must be
connected to ground in
compliance with electrical
system safety standards.
Use cables withstanding a
temperature of at least 90 °C.
The tightening torque of the
screws of the terminal supply
wires must be 1.5 - 2 Nm.
If the power cable becomes
damaged, contact technical
support immediately to arrange
for it to be replaced in order to
avoid possible hazards.
Always use any necessary/
required personal protective
equipment (PPE) before
performing any work on the
appliance (installation,
maintenance, positioning or
movement).
Before performing any
operation on the appliance,
switch off the power supply.
Disconnect the appliance after
the installation, through an
accessible plug or switch in
case of fixed connection.
Fit the power line with an all-
pole circuit breaker with a
contact separation distance
sufficient to provide complete
disconnection in category III
overvoltage conditions,
pursuant to installation
regulations.
This appliance can be used up
Loading ...
Loading ...
Loading ...