Loading ...
Loading ...
Loading ...
Settings Function
Unit is o
Fan Runs - no heat
Fan Runs - half power heat
Fan Runs - full power heat
Page 4 / 6
IMPORTANT:
Read all instructions and warnings carefully before installation and use. Failure to
follow instructions may result in a possible electric shock, injury to persons, re hazard and will void the warranty.
Electrical outlet wiring must comply with local building codes and other applicable
BGP1506-150
When using the heater for the rst time, there may be a slight emission of smoke. This is normal and
will stop after a short time. The heating element is made of steel and was coated with a layer of protective oil
during production.
1. Place the heater on a rm, level surface that is a safe distance away from wet locations and ammable objects.
2. Plug the power cord into a proper electrical outlet (see Grounding Instructions, page 5).
3. Set the power settings knob to the desired fan or heating position.
4. Set the thermostat dial to the maximum temperature.
5. Once the room reaches the desired temperature, turn the thermostat dial back until heating element turns
o. The heater will cycle automatically around this present temperature. To increase temperature, turn the
thermostat knob clockwise. To lower temperature, turn the thermostat counterclockwise.
Operating Instructions
12/2020
Loading ...
Loading ...