Loading ...
Loading ...
Loading ...
61
SQW0740
Recording mode
Taking pictures after automatically setting the
aperture value and shutter speed
(Programme AE Mode)
Recording mode:
Take pictures using automatic aperture values and shutter speed settings in accordance
with the brightness of a subject.
1
Set mode dial to [ ]
2
Press the shutter button halfway
• If the aperture value and shutter speed flash red, you do not have the correct
exposure.
3
While the numeric values are displayed
(approximately 10 seconds), rotate the
rear dial to change the values using
Programme Shift
Programme Shift indication
Aperture value
Shutter speed
250 125 60 30 15
5.64.02.01.4 2.8
• To cancel Programme Shift, either turn off the camera or rotate the rear dial until
the Programme Shift indication turns off.
• Programme Shift can easily be cancelled by setting a function button to [One
Push AE]. (→68)
About Programme Shift
The function for maintaining the same exposure (brightness) while changing the
aperture value and shutter speed combination is called “Programme Shift”. You can use
“Programme Shift” to take pictures by adjusting the aperture value and shutter speed
even in Programme AE Mode.
●
Programme Shift cannot be used in the following cases:
• When recording 4K photos
• When recording using [Post Focus]
• When ISO sensitivity is set to [
]
Loading ...
Loading ...
Loading ...