Loading ...
If, within one year from date of purchase, this Craftsman Band Saw/Sander fails due to a
defect in material or workmanship, we will repair it free of charge.
This warranty service is available by simply contacting any Sears store or Service Center
throughout the United States,
general safety instructions for power tools
1. KNOW YOUR POWER TOOL
Read the owner's manual Carefully. Learn its
application and limitations as well as the specific
potential hazards peculiar to this tool.
2, GROUND ALL TOOLS
This tool is equipped with an approved 3-conductor
cord and a 3-prong grounding type plug to fit the
proper grounding type receptacle. The green conductor
in the cord is the grounding wire. Never connect the
green wire to a live terminal.
3. KEEP GUARDS IN PLACE
and in working order.
4, REMOVE ADJUSTING KEYS
AND WRENCHES
Form habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
5. KEEP WORK AREA CLEAN
Cluttered areas and benches invite accidents. Floor
must not I:)e slippery due to wax or sawdust.
6, AVOID DANGEROUS ENVIRONMENT
Oon°t use power tools in damp or wet locations. Keep
work area well lit, Provide adequate surrounding work
space,
7, KEEP CHILDREN AWAY
All visitors should be kept a safe distance from work
area,
8. MAKE WORKSHOP KID-PROOF
- with padlocks, mas:er switches, or by removing
starter keys.
9. DON'T FORCE TOOL
It will do the job better and safer at the rate for which
it was designed.
10, USE RIGHT TOOL
Don't force tool or attaChment to do a job it was not
designed for.
11. WEAR PROPER APPAREL
No loose clothing, gloves, neckties or jewelry to get
caught in moving parts. Rubber-soled footwear is
recommended for best footing.
12. USE SAFETY GOGGLES
Safety goggles must comply with ANS Z87.1-1968.
Also use face or dust mask if cutting operation is dusty.
13, SECURE WORK
Use clamps or a vise to hold work when practical. It's
safer than using your hand, frees both hands to operate
tool.
14. DON'T OVERREACH
Keep proper footing and balance at all times.
15. MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and
changing accessories,
16, DISCONNECT TOOLS
before servicing, when changing accessories such as
blades, bits, cutters, etc.
17. AVOID ACCIDENTAL STARTING
Make sure switch is in "OFF" position before plugging
in.
18. USE RECOMMENDED ACCESSORIES
Consult the owner's manual for recommended
accessories. Follow the instructions that accompany
the accessories. The use of improper accessories may
cause hazards.
19.
20.
21.
NEVER STAND ON TOOL
Serious injury could occur if the tool is tipped or if the
cutting tool is accidentally contacted.
Do not store materials above or near the tool such that
it is necessary to stand on the tool to reach them.
CHECK DAMAGED PARTS
Before further use of the tool, a guard or other part
that is damaged should be carefully checked to ensure
that it will operate properly and perform its intended
function - check for alignment of moving parts, bind-
ing of moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. A
guard or other part that is damaged should be properly
repaired or replaced.
DI RECTION OF FEED
Feed work into a blade or cutter against the direction
of rotation of the blade or cutter only.
Loading ...
Loading ...
Loading ...