Loading ...
Loading ...
Loading ...
IMPORTANT
Do not lift the oven by the door handle.
3. Insert the oven into the cabinet opening, Slide oven
inward leaving IY2" (3,8 cm) clearance between the
oven and front of cabinet (see Figure 6), Pull tile armored
cable through tile hole for it in tile cabinet and toward
tile junction box while moving the appliance inward.
J
1/_" (3.8 cm)
clearance
between unit
Figure 6
4.Push the oven in and against the cabinet; the oven side
bracket will clip into the mounting brackets installed into
the side of cabinet.
To pull out the oven for servicing you must use the two
tools supplied with the oven. Insert one tool into hole in
each side of oven frame. Holes are visible when door is
opened. After inserting tools pull the oven towards you
(see Figure 7),
5. Bottom Trim Installation:
Place the top of the bottom trim over the side trim tabs
on each side of tile oven below the oven door and fix it
using the 2 screws supplied in tile mounting holes located
on each side trim below the oven frame (see Figure 8).
S Mounting
bracket installed
I I in cabinet
Oven
side _,
trim _1
/_ Cabinet
Oven
Right
Side
Tool
\--.. i_su pplied I
Mounting
bracket
released
31
1
Oven removed
from the cabinet
Hole where to
insert the tool
Figure 7
Screws
Figure 8
Loading ...
Loading ...
Loading ...