Amantii 60-TRU-VIEW-SLIM – Built-in 3-Sided Electric Fireplace

User Manual - Page 20

For 60-TRU-VIEW-SLIM. Also, The document are for others Amantii models: 30-TRV-SLIM, 40-TRV-SLIM, 50-TRV-SLIM, 60-TRV-SLIM, 72-TRV-SLIM

PDF File Manual, 29 pages, Read Online | Download pdf file

60-TRU-VIEW-SLIM photo
Loading ...
Loading ...
Loading ...
OPERATION
The fireplace can be operat ed eit her by the sw it ches located on the left bot tom of the fireplace unit
or by supplied remote control.
Plug t he fireplace into a 15 Amp wall socket .
M ANUAL OPERATION
1. The main power ON/ OFF switch in position O, t he fireplace is OFF.
2. When main power ON/ OFF sw it ch is at position I, the fireplace is ready to use.
3. Press the button repeatedly to set the heater to desired heat set ting. The heater indicator
LED will glow which shows the current heater set tings.
a) RED 1500W HEAT OUTPUT
b) BLUE 750W HEAT OUTPUT
c) PURPLE AUTO M ODE
AUTO M ODE
Under this mode the heater will automat ically turn ON at high heat set ting 1500W heat out put when
the room temperature drops below 22(72 ). When the room temperature is betw een
22-25(72-77 ) the heat er out put will switch to low heat set ting 750W. When t he room
temperat ure goes above 25(77) the heater will be turned off and the cycle will cont inue. The
LED indicator will be PURPLE in colour under this mode.
4. Flame effect: Press the butt on marked
to adjust the flame bright ness. The flame bright ness
will cycle through Low-M edium-High -OFF.
5. M ood light effect: Press the but ton marked
to change the mood light colour.
NOTE: If operated at the Low heat set ting, the fireplace will not provide as much heat out put as in
the High heat set ting, however the low set ting will not require as much electrical power to operate.
To avoid overloading a circuit, do not plug the fireplace int o a circuit that already has ot her
appliances working. When the fireplace is not in use switch off and unplug.
SAFETY CUT-OFF
l This appliance is fitted wit h a safety cut -off which will operat e if the fireplace overheat s (eg. Due
to blocked air vents). For safet y reasons, the fireplace will NOT aut omatically reset.
l To reset the appliance, disconnect the appliance from the main supply f or at least 10 minutes.
Reconnect the main pow er supply and put the main power sw itch to the ON posit ion.
20
Loading ...
Loading ...
Loading ...