Loading ...
Loading ...
Loading ...
installation
ToLevelFreezer:
After discarding crating screws and wood base, use a carpenter's level to level the
freezer from front to back. Adjust the plastic leveling feet in front, 1/2 bubble higher,
so that the door closes easily when left halfway open.
LevelingInstructionsForAll Refrigerator/FreezerPair:
, Remove two leg levelers provided in literature bag. While unit is lying on its back
for wood skid removal, install both leg levelers in rear of unit.
, Level door d first unit using all four levelers and slide unit into place. Recheck
for levelness and adjust if necessary.
• Measure distance from floor to bottom d door on first unit. Adjust and level
second unit so door height matches.
• Leg LevetAdjustments:
• One full turn of all four leg levelers will raise door 5/32".
• One full turn of both front leg levelers will raise door 3/16" and tilt top d door
back 7/16".
• One full turn of both rear leg levelers will lower door 1/32" and tilt top of door
forward 7/16".
, One full turn of both side leg levelers will raise door 3/16" and tilt top of door 3/8".
• Slide second unit into place leaving a minimum gap d 3/16" between units for
door swing clearance.
• This last step may require at least one extraction d the second unit to properly
align units in a "built-in" application.
Plastic
Leveling Feet
Crating
Sct'ew
And (2) Wood Bases
Loading ...
Loading ...
Loading ...