Loading ...
Loading ...
Loading ...
To fl t the tap correctly b ack in place proceed as follows;
Note: t he tray needs to be emptied out a nd cleaned every time
that the red float fitted to the grid rises; thi s is to stop llquid
from leaking out.
lift the tray with grid an d pull it outwar ds t o remove it fro m lts seating;
wash the tray and grid separately with lukewarm water.;
dry all of the components;
reposition the grid on top of the tray;
fit the tra
y back in place and press down to secure it to the machine.
Carry out the following steps:
prepare the sanitising solution
(see paragraph 7.7);
fill the bowl with the s anitising solution;
leave the solution to act for about 30 minutes;
empty out the sanitising solution from the bowl;
then rinse out the bowl and inside surfaces thoroughly to elim inate all resi-
dues of sanitizing solution.
SL320001846 Ed.03 - 06/2008
-
17 EN -
Rem o ve the b owl lid from the ma c hine;
W
arnin g! th e ther m o st a t m u st be s e t t o - OFF-.
in sanitising product.
rinse thoroughly using clean water.
clean the surface using a damp cloth and/or a non-abrasive spong e soaked
T he drip tray should be emptied and cleaned dally.
hold d own the butt on , m akin g sure that the rod is comp letely e xtra ct ed;
introduce the tap into the seat provided and push until the pushbutton re-
turns to its initial position.
7.8.3 Fitting the tap
7.10. Cleaning the drip tray
7.9. Internal sanitization
7.11. Cleaning the bowl lid
04/2010
Loading ...
Loading ...
Loading ...