Loading ...
Loading ...
Loading ...
Ell
Fll
g_
10.
11.
1. Do not operate a chain saw that is damaged,
improperly adjusted, or not completely and
securely assembled.
2. Do not use thesaw if the trigger switch does
not turn the unit on and off properly. Repairs
to the trigger switch must be made by your Sears
Service Center.
3. Do not operate the saw from a ladder or in a
tree.
4. Position all parts of your body to the left of
cut when the motor is running.
5. Cut wood only. Do not use a chain saw for any
purpose other than those described in this man-
ual.
6. Make sure the chain will not make contact
before starting the motor. Never try to start the
saw when the guide bar is in acut or kerf.
7: Use extreme caution when cutting small size
brush and saplings. Slender material may
catch .the saw chain and be whipped toward you
or pul!:you off balance.
8. Be alert for springback when cutting a limbthat
isunder tension to avoid being struck by the limb
or saw when the tension inthe wood fibers is re-
leased.
Do not force the saw through a cut. Exert light
pressure only. Pressure on the saw at the end
of a cut could cause loss of Control when the cut
is completed.
Avoid body contact with the chain anytime
the saw is plugged into a power source. The
chain willcontinue to move for ashort time after
the trigger is released.
Unplug the power connection when the saw
is not in use.
MAINTAIN YOUR SAW IN
GOOD WORKING ORDER
1. Unplug the saw before servicing or changing
accessories.
2. Hat;e _lll chainsaw service performed bY YOur
sears service Center, other than the service
described in the maintenance section of this
manual.
3. Keep chain and guide bar clean and properly
lubricated.
4. Keep oil cap, screws and fasteners tight.
5. Keep the handles dry, clean_ and free of oil.
6. Stop the saw if the chain strikes a foreign ob-
ject. Check for alignment, binding, breakage,
and mounting of moving parts and any other con-
dition that may affect the operation of the unit.
Check guards and all other parts to see if each
will operate properly and perform its intended
function. Any part that is damaged should be
properly repaired or replaced by using the in-
structions inthismanual or by seeing your Sears
Service Center.
7. Be certain the saw chain stops moving when
the trigger switch is released.
8. Make certain that all hand tools are removed
from the saw before connecting the saw to the
power source.
9. Make sure all replacement partsare genuine
recommended parts.
10. Never modify your saw in any way. Use only
attachments supplied or specifically recom-
mended by Sears:
G. CARRY AND STORE
YOUR SAW SAFELY
1. Never carry your saw while climbing. Both
hands are needed for safe climbing.
2. Carry the unit unplugged,by the front handle,
finger off "the trigger switch, and with the
guide bar and chain to the rear.
3. Carry the saw with guide bar and chain
covered by the scabbard.
4. Before transporting in any vehicle or storing
in any enclosure, allow your saw to coot com-
pletely, cover the bar and chain and properly se-
cure to avoid turnover or damage.
5. Drain oil tank before storing your saw for 30 or
more.days.
6. S.tore in a dry area Outofthe reach of children.
SAVE THESE INSTR UCTIONS
Loading ...
Loading ...
Loading ...