Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
TO CHANGE TEMPERATURE DISPLAY; YOU WILL SEE;
_" temp/timer
®
FAULT CODES
r
temp/dmer
cool auto m
[] energy saver hi
Ian only lo
0
_ J
DO THIS;
PRESSAND HOLD
THE UP/DOWN
BUTTONS TOGETHER
FOR 3 SECONDS
f
temp/timer
cool auto m
[] energysaver hi
)on only to
®
cool auto m
m ener_Ty saver hi
fan only lo
®
Note: The control is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius.
[f the display reads "AS" or "ES",
a sensor has failed. Contact your
Authorized Frigidaire Service Center.
TO TURN UNIT OFF:
f
temp/timer
cool auto
energy saver hi
fon only to
®
L
DO THIS:
PRESSON/
OFF BUTTON
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
• The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time.
, There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
, The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
• After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
(2-WAY)
AUGER WHEEL
Air Directional Louvers
Air directional louvers control air flow direction. Your air conditioner has the louver
type described below.
Auger Type
Rotate the Auger Wheel until the desired Left/Right direction is obtained.
8 ©2009 E!ec!ro!ux Home Produc!s¢ !nc: A!! [!gh!s [ese_ed,
Loading ...
Loading ...
Loading ...