Loading ...
Loading ...
Loading ...
press the power switch to “O” position and make the appliance
stop running completely and then turn the power switch from "I"
to "R" or from "R" to "I" .
Caution: Do not operate the unit before feeding food to avoid
damaging the grinding assembly (include grinding head and
strainer).
Caution: Do not put your fingers or other foreign objects into the
feeding opening while it is in
operation.
6. During operation, if the machine
is stuck and not operable, please
firstly press the power switch to “O” position and then press the reset
switch which is equipped at the bottom of appliance (see Fig.6). After
it, press and hold the power switch to the “R” position for few seconds
then try operating again. When reverse function cannot work, turn off
the machine and reassemble following the instructions given. After
reassembly please try turning on the machine.
7. When the juice container is full (the max capacity is 400ml) or the
food has been finished extracting, turn the power switch to the “O”
position and empty the juice container and residue container before
continuing extracting.
Note: The max operation time per time shall be less than 15
minutes. Minimum 30 minutes rest time must be maintained
between continuous two cycles.
Note: Do not insert too much food to extract per time. During
operation, once the juice container is full, you must stop the
appliance and empty the residue container before next cycle.
Note: During operation, if the interlock switch between the jar lid
and the motor unit is disconnected, the motor will stop to
prevent from danger.
Note: When extract juice, the residue must be removed as soon
as possible so that the jar, grinding head and jar lid can be
Fig.6
Reset switch
Loading ...
Loading ...
Loading ...