Loading ...
Loading ...
Loading ...
Ovendoorwillnotopen.
Errorcodeappearsandstays
ondisplay,for example"U55."
Oven is setto selfclean.
Anerrorcodehavinga letterwith
a numberfollowingit that appears
and staysonthedisplayindicates
a problemthatcannotberesolved
bythecustomer,
Checkdisplay.If locksymbolappearson
displayovendoorcannotbeopened.Waitfor
ovento completeselfcleanprocessor press
CANCEl_. SECURE. Door will unlock once oven
has cooled.
Call for service.
Igniters do not spark. Have an electrician connect range to properly
wired electrical connection.
No flame.
Flame is distorted, yellow or
very large.
Igniter continues to spark
(click) after flame ignites.
Flame goes out at low setting.
Power not supplied to unit.
Power to range is off.
Power outage.
Wet or dirty igniter.
Igniter not working (no clicking
sound).
Wet or dirty igniter.
Gas is turned off.
Gas supply interrupted.
Burner ring or burner cap is dirty
or clogged.
Burner parts not properly posi-
tioned,
Range set up to use a different
type of gas (Natural or LP) or set
up for different altitude.
Gas regulator is not installed or
faulty.
Burner is cold.
Flame distorted by air draft.
Wet or dirty igniter.
Burner ring or burner cap is dirty.
Burner parts not properly posi-
tioned.
Air intake holes obstructed.
Low gas pressure,
Turn power on at junction box. Check for
_trip d circuit brea er or blown fuse
Clean according to Care and Cleaning section.
Clean and dry according to Care and Cleaning
section.
Make sure the gas supply valve is in the on
position.
Contact gas company.
Clean and dry according to Care and Cleaning
section.
Make sure burner is assembled according to the
Setting Up Your Range section.
Have a qualified service technician check to
make sure that the range is set up for the type
of gas and the correct altitude.
Have a qualified service technician check the
gas regulator.
Burners may continue to spark for up to 60 sec-
onds when cold and set to low. See Operating
Minimize any air drafts around the range. Close
nearby windows.
Clean and dry according to Care and Cleaning
section.
Clean and dry according to Care and Cleaning
section.
Make sure burner is assembled according to the
Setting Up Your Range section.
Check to make sure air holes on range are not
blocked. See page 4 for locations.
31
Loading ...
Loading ...
Loading ...